Septic Formula 500X SLUDGE MIX - 5 gallons

5 gallon bucket of Formula 500X SLUDGE MIX.

Eliminates solids and reduces Hydrogen Sulfide odors, B.O.D. and C.O.D. from: septic tanks, livestock lagoons, city sewage systems, grease traps, restaurants and school cafeterias, waste treatment plants and treatment plants. 

• Non-Toxic
• Non-Pathogenic
• Reduces Odors (Hydrogen Sulfide)
  
• Reduces B.O.D and C.O.D
• Contains Aerobic and Anaerobic Strains of Bacteria
• 100% Live Micro Organisms
• Lives Off All Waste Matter
  
• Liquid Form (Easy to Use)
  
• Note (This Product is not Enzyme or Spores)

100% LIVE MICROBES

SHAKE WELL BEFORE USING

NET CONTENTS:  5 Gallons

MUNICIPAL WASTE PROCESSING PLANTS AND SEWAGE SYSTEMS

SLUDGE MIX, when applied to municipal waste processing plants and sewage systems, will reduce Hydrogen Sulfide, Biological Oxygen Demand (BOD) and Chemical Oxygen Demand (COD).  After the application of SLUDGE MIX, it will take approximately 30 to 90 days before a noticeable reduction in the Hydrogen Sulfide, BOD and COD will occur.  This has to do with the flow of influent entering the plant.  For best results, SLUDGE MIX should be applied to the wet well, which is the last point where the sewage is pumped for distribution (or the first point where it enters the plant).  In some cases, municipal waste processing plants and sewage systems do not have wet wells and have only setting tanks.  SLUDGE MIX should be applied directly to the setting tanks for these types of systems.  Many problems often arise in other areas of waste treatment plants.  For example, if a problem should exist in the digester or the trickling filter is is recommended that SLUDGE MIX be applied directly to the area.  SLUDGE MIX should be used on a 20 to 1 ratio for the first 3 days (20 gallons to each 1 million gallons of flow per day).  After the 3rd day a ratio of 10 gallons per 1 million gallons of flow should be used on a regular daily schedule.

SEPTIC TANKS

A weekly treatment is all that is necessary for treating septic tanks.  The application of the SLUDGE MIX is very simple:  flush down any toilet leading to the septic tank, 16 ounces for each 20 to 25 cubic feet of capacity for the first week.  For preventive maintenance, thereafter, use 8 ounces each week for each 20 to 25 cubic feet of capacity of each tank.

KEEP OUT OF REACH OF CHILDREN

DO NOT ALLOW SLUDGE MIX TO COME INTO CONTACT WITH OPEN WOUNDS OR SORES.

GREASE TRAPS

SLUDGE MIX should be flushed down the nearest drain leading to the grease trap or applied directly to the trap.  Use 16 ounces of SLUDGE MIX for each 20 to 25 cubic feet of capacity every three days for the first week.  Thereafter for preventative maintenance, use 8 ounces twice a week for each grease trap.

FOOD PROCESSING AND INDUSTRIAL MANUFACTURING PLANTS

There are many processing plants and industrial manufacturing plants that have ponds, lagoons, and other retention areas.  Use SLUDGE MIX to treat waste in these areas.  On the initial application utilize 20 parts per million for the first 7 days of treatment and thereafter 10 part per million.

HOG AND CATTLE FEED LOTS

Compute the number of gallons of water in lagoon or pond plus the number of gallons of water flowing into the pond daily.  For the 1st through 3rd day use 20 parts per million (20 gallons for each million gallons of water by volume).  Each day thereafter the use of SLUDGE MIX should be used on a 10 part per million basis computed on the daily flow of the influent entering the pond.  This product is simply applied by shaking the gallon well and dumping into the lagoon or pond.

Call John for bulk pricing on 55 gallon drums or 250 gallon totes. (573) 489-3459